Rebar Corrosion and Protection: Causes and Prevention
Rebar corrosion is the single most common and costly durability problem affecting reinforced concrete structures. When the steel reinforcement inside concrete rusts, it expands,…
Category: Construction
Concrete · materials · foundations · how buildings are built
Steel Grades in Construction: What the Numbers Mean
Steel grades describe the mechanical properties of a steel — chiefly its yield strength, tensile strength and ductility — along with its chemical composition.…
Concrete Admixtures Explained: Types and How They Work
Concrete admixtures are materials added to a concrete mix, in small quantities, to modify its properties in the fresh or hardened state. They are…
Fibre-Reinforced Concrete: How Fibres Strengthen Concrete
Fibre-reinforced concrete is ordinary concrete with short, discrete fibres mixed evenly throughout the matrix. Those fibres — steel, synthetic polymer, glass or natural —…
Self-Compacting Concrete: How SCC Works
Self compacting concrete, usually abbreviated to SCC, is a highly flowable concrete that spreads into formwork, fills every corner and encapsulates even densely packed…
High-Strength Concrete Explained for Buildings
High strength concrete is concrete engineered to reach a characteristic compressive strength well above the ordinary structural range, typically from around 50 to 60…
Engineered Wood Products: A Structural Guide
Engineered wood describes a family of structural products that take ordinary timber and reassemble it into something stronger, larger and more predictable than the…
Mass Timber and Cross-Laminated Timber Explained
Cross laminated timber, usually shortened to CLT, is a solid engineered panel made from layers of sawn lumber glued together with each layer running…
Parapet Walls Explained: Function, Design and Failures
A parapet wall is the low wall that runs along the edge of a roof, balcony, or terrace, rising above the level of the…
Curtain Wall Construction Explained
A curtain wall is the lightweight, non-load-bearing external facade — usually of glass and aluminium — that hangs off the front of a modern…
The Concrete Slump Test Explained
The concrete slump test is a simple, quick check carried out on site to measure the workability — essentially the wetness and consistency —…
Types of Scaffolding in Construction
Scaffolding is the temporary framework of tubes, frames and platforms that gives workers safe access to a building’s elevations during construction, repair or maintenance.…